Automotive Services & Fluid Film® Undercoating
Professional rust prevention, undercoating, and automotive fabrication — all done in house at our Elkton, Maryland shop. Whether you’re protecting a daily driver or repairing structural damage, we handle it with the same precision we bring to industrial work.
What Is Fluid Film®?
Fluid Film® is a lanolin-based rust and corrosion inhibitor used by the US military, municipalities, and vehicle owners across the country. Unlike hard-shell undercoating products, Fluid Film® stays wet and self-healing — it penetrates existing rust, creeps into seams and cavities, and continues protecting even after application.
It’s non-toxic, non-solvent, and safe on all metals, rubber, and plastic components. One treatment goes a long way — most vehicles benefit from an annual application to maintain full coverage.
Why Fluid Film®?
Stays Active
Unlike rubberized coatings that crack and trap moisture, Fluid Film® remains fluid. It self-heals over minor scratches and continues to creep into new areas over time.
Penetrates Existing Rust
Fluid Film® doesn’t just sit on the surface — it penetrates existing corrosion and halts further oxidation. Effective even on vehicles that already show early rust.
Safe on Everything
Non-toxic, non-solvent formula is safe on all metals, rubber, plastic, and electrical components. No need to mask or remove parts before application.
Long-Lasting Protection
A single application provides protection through a full winter season. Annual treatment keeps coverage topped up and corrosion at bay year after year.
Trusted & Proven
Used by the US military, state DOTs, and municipalities for decades. One of the most widely trusted corrosion protection products available.
Environmentally Friendly
Made from natural lanolin — biodegradable and free of solvents, heavy metals, and harsh chemicals. Better for you and the environment than petroleum-based alternatives.
What We Treat
We apply Fluid Film® to the full undercarriage and exposed metal surfaces of cars, trucks, and heavy equipment. Every application covers the areas most vulnerable to road salt, moisture, and corrosion.
Passenger Vehicles
- Cars and SUVs
- Trucks and vans
- Classic and collector vehicles
- Daily drivers and newer vehicles as prevention
Heavy Equipment
- Trailers and flatbeds
- Agricultural equipment
- Construction and utility equipment
- Commercial fleet vehicles
Areas Covered
- Full undercarriage and frame
- Wheel wells and inner fenders
- Door seams, rockers, and body cavities
- Exposed brake and fuel lines
What to Expect
The process is straightforward. Drop off your vehicle, we do the work, and you’re back on the road the same day.
1. Schedule
Contact us to book a time. Let us know your vehicle type and we’ll give you a quote and estimated time in the shop.
2. Drop Off
Bring your vehicle to our Elkton, MD shop. No special prep needed on your end — we handle everything from there.
3. Application
We apply Fluid Film® to the full undercarriage and all vulnerable surfaces. Most vehicles are completed the same day.
4. Pick Up & Go
Your vehicle is ready to drive immediately after application. We recommend annual reapplication to maintain full protection.
Automotive Fabrication & Repair
Beyond undercoating, we offer fabrication-based automotive repairs for structural and custom work. If a part is corroded, broken, discontinued, or just doesn’t exist yet — we can build or restore it.
Structural Repairs
Welding and fabrication for corroded or damaged structural components — frames, crossmembers, floor sections, and more. Built to spec and shop-tested for durability.
- Frame and crossmember repair
- Floor pan and rocker repair
- Rust repair and reinforcement
Custom Fabrication
Custom brackets, mounts, hitch plates, and supports — fabricated to fit your vehicle and application. Ideal for off-road builds, towing setups, and hard-to-source replacement parts.
- Brackets, mounts, and hitch plates
- Custom skid plates and guards
- Replacement parts for discontinued components
General Repairs
Welding-based fixes for broken or worn vehicle components. If it’s metal and it’s broken, there’s a good chance we can repair it without sourcing an expensive replacement part.
- Exhaust and heat shield repairs
- Broken bolt and stud extraction
- General welding repairs on vehicle components
Our Work
Common Questions
How often should I get Fluid Film® applied?
Once a year is typical for most vehicles. Late fall before winter road salt season is ideal, but any time of year works. Vehicles in high-exposure environments may benefit from a mid-season touch-up.
Can it be applied to a vehicle that already has rust?
Yes. Fluid Film® penetrates and stabilizes existing surface rust rather than just coating over it. It won’t reverse structural damage, but it will slow or stop further progression on affected areas.
Will it drip or smell after application?
There may be a brief drip period immediately after application as excess product settles — this is normal and stops quickly. Fluid Film® has a mild, natural lanolin scent that dissipates within a day or two.
How long does the appointment take?
Most passenger vehicles take 1–2 hours. Larger trucks and heavy equipment may take longer depending on size and condition. We’ll give you a time estimate when you book.
Do I need to do anything to prepare my vehicle?
No special prep needed. Just bring it in as-is. We handle the inspection and application from start to finish.
Get in Touch
Ready to protect your vehicle or need a fabrication repair? Contact us to schedule an appointment or get a quote — we’ll get back to you quickly.
Vehicle owners from across Maryland, Delaware, and southeastern Pennsylvania bring their cars and trucks to our Elkton shop for Fluid Film protection.